mob-menu-reach-x 7 Londor Close Hemmant QLD 4174 sales@kplfiltration.com.au
mob-menu-reach-x sales@kplfiltration.com.au
mob-menu-reach-x
Specialised Units
ISOPur Varnish Removal Units
Standard Filtration Units
Bypass Filtration Units
Custom Filtration Units

New Generation Units
Electric Units
Pneumatic Units

Specialised Products
ZOK & ZI400
Turbo K

Consumables
Filters
Lubricants
Spill Control
Storage & Accessories

 Skip to content
1300 30 88 66

Oil & Gas, Power Generation & Energy Sector Filtration Services

KPL Filtration has extensive technical experience across the energy sector — providing specialist lubrication, filtration and oil analysis services to oil and gas operations, power generation facilities, LNG plants and pipeline operators throughout Queensland and the Asia Pacific region. From turbine oil management and compressor lubrication to diesel generator maintenance and pipeline filtration, KPL delivers the products, expertise and onsite support your operation demands.

In the energy sector, equipment reliability is not just a maintenance objective — it is a safety and production imperative. Turbines, compressors, diesel generators and pipeline systems run under high loads and extreme conditions, and the lubricants and filtration systems protecting them must perform without compromise. Contaminated oil, varnish build-up and moisture ingress are among the most common causes of unplanned downtime in energy facilities — and all are preventable with the right maintenance program.

KPL works with energy sector clients to design and implement proactive lubrication and filtration programs that reduce contamination risk, extend fluid life and protect critical assets. Our team is independent and technically objective — we recommend the products and services that deliver the best outcome for your equipment and your operation, not what suits a brand agenda.

Maintenance Objectives

KPL supports your technical team with products and services to achieve:
  • Turbine oil cleanliness targets and ISO cleanliness code compliance
  • Compressor lubricant management and extended drain intervals
  • Diesel generator fuel system cleanliness and reliability
  • Varnish removal and prevention in hydraulic and lubricating oil systems
  • Moisture and particulate control in critical rotating equipment
  • Maximising equipment reliability, safety and uptime
  • Minimising repair, replacement and unplanned maintenance costs
  • Satisfying OEM warranty requirements and service agreements
  • Environmental compliance for spill containment and fluid disposal

Equipment We Support in the Energy Sector

Gas & Steam Turbines

Turbine lubrication systems require extremely clean oil to protect bearings, journals and control systems. Varnish build-up — caused by oil oxidation and thermal degradation — is one of the leading causes of turbine trips and unplanned outages. KPL supplies ISOPur varnish removal systems and turbine oil filtration solutions to maintain ISO cleanliness targets and extend turbine oil life.
Learn about varnish removal

Gas Compressors

Compressor lubricants must handle high discharge temperatures, moisture and gas contamination while maintaining film integrity. KPL supplies specialist compressor oils and filtration solutions for rotary screw, reciprocating and centrifugal compressors in gas processing, LNG and pipeline applications, and can provide lubricant analysis to monitor oil condition between service intervals.
Learn about lubricant analysis

Diesel Generators & Standby Power

Diesel generators and standby power systems depend on clean fuel and well-maintained lubrication systems to start reliably under load. KPL supplies diesel fuel filtration equipment, fuel polishing services and generator lubricants to ensure your emergency and continuous power generation assets are always ready when needed.
Learn about onsite filtration

Pipeline & Hydraulic Systems

Pipeline pumping stations, valve actuators and hydraulic control systems require highly clean hydraulic and lubrication fluids to operate reliably. KPL supplies filtration equipment and filter elements for pipeline applications, and can perform onsite flushing and commissioning of new pipeline hydraulic systems to the required cleanliness standard.
Learn about filtration systems

Heat Exchangers & Cooling Systems

Contaminated cooling fluids and heat transfer oils cause fouling, reduced thermal efficiency and corrosion in heat exchange equipment. KPL can supply filtration and fluid conditioning solutions for heat exchanger systems, and provide coolant analysis to monitor fluid condition and inhibitor levels.
Contact us to discuss

LNG & Offshore Facilities

LNG processing and offshore energy facilities present demanding environments for lubricants and filtration equipment — extreme temperatures, hazardous area classifications and remote locations all add complexity. KPL supplies ATEX and IECEx rated filtration units suitable for use in hazardous areas, and has experience supporting clients in the Asia Pacific region.
Contact us to discuss

KPL Services for the Energy Sector

Varnish Removal — ISOPur Units

Varnish is a common and costly problem in turbine and compressor oil systems. As lubricating oil ages and oxidises, insoluble degradation products form on surfaces — restricting oil flow, causing servo valve sticking and triggering equipment trips. KPL’s ISOPur Balanced Charge Agglomeration technology removes varnish particles as small as 0.01 micron, restoring system cleanliness without a full oil drain.

Learn about ISOPur
Lubricant & Oil Analysis

Regular oil analysis is an essential condition monitoring tool for energy sector equipment. KPL uses independent laboratories to test turbine oils, compressor oils, hydraulic fluids and diesel fuel for contamination, wear metals, viscosity, acid number and moisture — giving you early warning of problems before they become failures. Results are provided with clear, actionable recommendations.

Learn about lubricant analysis
New Generation Filtration Units
KPL’s mobile filtration units are compact, purpose-built and available in electric and pneumatic configurations — including ATEX and IECEx rated units for use in hazardous areas. Units can be hired or purchased, and can be used on equipment while in operation, minimising downtime. Available for immediate mobilisation across Australia.
View filtration units
Onsite Filtration Services
KPL’s experienced technical team can mobilise to your site to perform onsite filtration, system flushing, commissioning and decommissioning, internal tank cleaning and filter maintenance. We carry specialist equipment for oil conditioning and decontamination, and can work to your site’s safety management system and environmental requirements.
Learn about onsite services
Preventative Maintenance Programs

KPL designs custom preventative maintenance programs for energy sector clients — integrating lubricant analysis, filtration schedules, filter maintenance and fluid condition monitoring into a single proactive support plan. Programs are tailored to your equipment criticality, operating hours and maintenance team capacity.

Learn about preventative maintenance
Filtration Equipment Hire
KPL’s filtration units are available for hire across Australia on both short and long-term arrangements. Hire is an efficient option for outages, shutdowns and commissioning projects where temporary filtration capacity is required. Units are available immediately, with technical setup and training support provided.
Learn about equipment hire

Why Energy Sector Clients Choose KPL

Why energy and oil & gas operators choose KPL:
  • Specialist technical knowledge — our team understands the unique lubrication and filtration challenges of turbines, compressors, generators and pipeline systems
  • Independent advice — we are not aligned to any single lubricant or filtration brand; our recommendations are based purely on what is right for your equipment
  • Hazardous area capability — ATEX and IECEx certified filtration units available for use in classified zones
  • ISO accreditation — quality assurance to Australian Standards across all products and services
  • Flexible supply — products and services available for short-term projects, shutdowns and long-term maintenance contracts
  • Asia Pacific reach — KPL has experience supporting clients across Australia and the Asia Pacific region, including remote and offshore locations
  • Over 20 years of experience — deep technical knowledge built across energy, mining and industrial sectors

Testimonial

“KPL and their whole team has always provided a great service with the technical support to assist us with our operation. KPL's offering is to supply only the best quality products and services applicable to our conditions and requirements.”
Brian M
Maintenance Superintendent — PT Freeport Indonesia

FAQ...

Varnish is formed when lubricating oil degrades through oxidation and thermal stress, producing insoluble resinous by-products that deposit on surfaces. These deposits restrict flow in servo valves, block oil passages and cause equipment trips. KPL’s ISOPur varnish removal technology uses Balanced Charge Agglomeration (BCA) to attract and capture varnish particles as small as 0.01 micron — removing them from the oil without requiring a full system flush or oil change. The unit can be connected to operating equipment and left to run continuously until target cleanliness is achieved.

Most OEMs recommend turbine oil analysis at least every six months for critical assets, or every 2,000 operating hours — whichever comes first. For older systems or those with known contamination history, quarterly testing is advisable. KPL uses independent laboratories to test for viscosity, acid number, water content, particle count, wear metals and varnish potential rating (VPR). Results are provided with a clear condition assessment and recommendations.

Yes. KPL supplies electric and pneumatic filtration units with ATEX and IECEx certification suitable for use in classified hazardous areas, including Zone 1 and Zone 2 environments. These are available for hire or purchase. Contact our team with your hazardous area classification and we can confirm the appropriate equipment.

Yes. KPL has experience mobilising to remote sites across Queensland and the Asia Pacific region. Our team works to client site safety management systems and carries the appropriate PPE, equipment and documentation. Contact us to discuss your site requirements and we can provide a scope and quote.

KPL supplies turbine oils, compressor oils and associated lubricants from leading brands including Fuchs, Castrol, Shell, Mobil and Kluber. We can cross-reference OEM specifications to identify the correct product for your equipment, and provide independent advice on whether alternative products offer equivalent or superior performance. Our technical team can also advise on lubricant compatibility when transitioning between products.

Yes. KPL is experienced in commissioning and decommissioning of lubricant and fuel systems, including pre-commission flushing of pipework to achieve target cleanliness levels, internal tank cleaning and initial fill filtration. We can provide the filtration equipment, technical supervision and oil analysis required to commission new systems to OEM specifications.

Discuss your energy sector requirements with KPL

Whether you need onsite filtration support, lubricant analysis, varnish removal or a long-term preventative maintenance program, KPL has the technical capability and equipment to help. Call us on 1300 30 88 66 or email sales@kplfiltration.com.au to discuss your requirements.

Contact Us
Request a Quote
Download Product Catalogue

Service Contact

Shopping cart